Go Bottom

---

JD750 Compact Diesel

Buck Buchanan Join Date: Posts: 1

2003-05-11          54667

I have a JD 750 Compact Diesel. It's unstable because of narrow wheel base.
I am looking for a kit to widen the wheel base by 2" on each side? Is one available or are you interested in producint one like I've described here?

This kit for each pair of wheels would consist of:
two 1/8"-thick 4" long Steel Swaged Cylinders. Half (2") would fit over the hub, the remainder swaged down to fit inside the center hole of the wheel.
12 Lug Bolts (grade 7) 3-1/4 to 3-1/2" long for rear wheels and 12 for front wheels
12 2" spacers for rear lug bolts.
12 2" spacers for front lug bolts.

There may be a market for this kit and if you are interested in producing it, I will provide AutoCAD drawings of the parts in exchange for one complete kit for front and rear wheels.

thanks

Buck Buchanan
318-590-9835

*************************************************************
All incoming and outgoing mail virus-scanned by Norton Anti-Virus


Reply to | Quote Reply | Add Photo

---

JD750 Compact Diesel

beetle Join Date: Jul 2003 Posts: 11 Ohio

2003-06-03          56452

Have you turned the rims around? If they are set at narrow width you can reverse them and add 6-8" to the foot print. The procedure is explained in your manual. ....

Reply to | Quote Reply | Add Photo


   Go Top


Share This

Create New Member Account

Member Login

Userid:

Password

Login

Ask A Question !